buckshot164
Well I was working on this ss2 board.  I was hooking up a camera to it.  Somehow I knocked this resistor off and one of the pads came with the resistor.  How can I fix this resistor problem.  I have one pad.  Where does the resistor go. P1030175.JPG
Quote 0 0
bigbassmann
Charles, it looks like the pad that is missing was connected to the trace that I have outlined in the picture below. You could gently scrape the solder mask off of that trace and solder the top edge of the resistor directly to the trace or solder a wire to the resistor and the other end of the wire to the solder pad at the switch that the trace goes to.
SS2.jpg
Quote 0 0
buckshot164
What size resistor was it.
Quote 0 0
ghoot
Charles,
That's a 4.7K resistor.
Quote 0 0