I have a few moultrie external flash extenders (external flashes) and they eat batteries. (these were necessary because Ralph said the timing is different from commercial infrared cams and his product would not work) They take the same 8 AA battery tray (@9v output) that the moultrie cams do.  The moutlrie cams have a 12v external power jack for hooking up a 12v sla for power.  The flashes have no power jack.  Im thinking they can be power with a 12v sla as well if you solder leads onto the terminal ends of the battery tray. Would some type of regulator be required to keep the voltage in the 9v range? If so what and how.  Im guessing that the cameras have some type of regulator built into them from the factory?
Quote 0 0