DIY Trailcams
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
coyote08

Avatar / Picture

Registered:
Posts: 531
Reply with quote  #1 
Here is the hack for this camera I posted a build of earlier.  You can purchase a shutter release cable for these that plugs into the USB port.  The downside is the USB port is on the back of the camera and adds about an inch to the depth of the camera.  Battery is a 7.2V lion battery charged up to 8.4V.  Ralph Davis did a special program with his Safari board for this.

Here are some pics showing what screws need to come off to hack the camera.  Red arrows point to the screws needed to take out.

Left Side
IMG_20160604_063147089_HDR.jpg 
Bottom
IMG_20160604_063132362.jpg 
Eye Piece 
IMG_20160604_064022017.jpg 
This piece then comes off after the 4 screws are removed.IMG_20160604_063816873.jpg 

I have the hack wires coming through the XD card slot since I use the CF card slot.  The part that looks like a mouse chews is for the wires so the door can close. 
IMG_20160604_064114742.jpg 

Here is the back of the camera with rear cover removed, i didn't remove the ribbons, was just careful.  
IMG_20160604_062412410_HDR.jpg 

External close up, Green = -               Red=+
IMG_20160604_062426832_HDR.jpg 
The hack points are on the bottom of the USB port.  
IMG_20160603_223711203.jpg

0
bigbassmann

Avatar / Picture

Registered:
Posts: 1,888
Reply with quote  #2 
Nice work on the hack Aaron. Thanks for posting it.
__________________
http://rcdavisgamecamerasolutions.weebly.com/
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.