DIY Trailcams
Register Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
coyote08

Avatar / Picture

Registered:
Posts: 530
Reply with quote  #1 
I'm wondering if anyone else thinks I could use this board and have connections hooked up to the 5V and 3.3V outputs at the same time? It says its a combined 200mA, so I'm wondering if I'm using both, will it only be 100mA per side?  My thought on use for this would be to have a solar panel with the barrel jack plugged into the jack, then have a line from the 5V to keep the batteries for a 4.5V control board, and then the 3.3V to charge batteries for like a Sony camera.  


http://www.mcmelectronics.com/product/28-17745?green=0B99E566-75E2-5901-9604-A7C2B2139EA1
0
bigbassmann

Avatar / Picture

Registered:
Posts: 1,857
Reply with quote  #2 
I would think it would all depend on what the output voltage of the solar panel is. The description says something about 9v 2.1mm barrel connector so I'm not sure if 9v input is the max it is designed for.
__________________
http://rcdavisgamecamerasolutions.weebly.com/
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.